371 60101636

6YL-90 Screw oil press

  • Model: 6YL-90
  • Screw diameter(Mm): φ 80
  • Screw speed(R/min): 40-50
  • Host power(Kw): 5.5(Y132M-4)
  • Heater(Kw): 1.2
  • Handling capacity(Kg/h): 100-120
  • Total weight(Kg): 700
  • Package size (Mm): 1540x510x680
  • 6yl-90-screw-oil-press
  • 6yl-90-screw-oil-press for sale
  • 6yl-90-screw-oil-press supplier
  • 6yl-90-screw-oil-press  manufacturer

We're here to help:Easy ways to get the answers you need.

Follow Us :
| Share: Bookmark and Share


Your position: Home > Products > Oil Press > Screw-Type Oil Press
■ Introduction

6YL series Screw Oil Press
Operating principle
During the press running, the processed oil plants from the hopper into the press chamber. The press screw press the raw material by push foward them. Under the condition of the high pressure in the press chamber, the raw material and press screw and press chamber had a huge frictional resistance, so that cause friction between micro raw material, due to relative motion. On the other hand, because of the diameter of screw is gradually enlarged, but the screw thread is gradually reduced, thus when press screw rolling,the screw thread forced the material move foward and can flip outward, at the same time, the surface layer of material closed to the press screw thread is rolling with the press shaft, so that caused the micro raw materials are not moved constant speed and same direction, but exist a relative motion between micro raw materials. And the heat caused by friction meet the necessary heat of oil process operations,helps to feed protein denaturation in the raw material, destroyed colloid, increased the figurability, and reduce the viscosity at the same time, easy to precipitate oil, thus increasing oil producing ratio of the oil press.

■ Technical Data

6YL-90 Screw oil press technical parameter:

Model 6YL-90
Screw diameter φ 80mm
Screw speed 40-50r/min
Host power 5.5KW(Y132M-4)
Heater 1.2KW
Handling capacity 100-120Kg/h
Total weight 700Kg
Package size (mm) 1540x510x680
■ Details

6YL-90 Screw oil press advantage

High oil extraction rate -- compare with old model, multi-stage press,one time finish press, increase the oil extraction rate by 2-3%.
Enrgy saving-- comapare with same capacity products, it can reduce electric power 40%, each hour can saving 6KW/H.
Labor saving-- compare with same capacity products, it can save labour 60%, only need 1-2 person can opearting.
Cover small area-- only need 10-20 square meter can meet the use.

Novel design, mechatronics
Scientific design, reasonablly structured, user-freindly control, safety and stability, using fully automated device, only for a few minutes from the feeding to the finished product.

Good material Precise technology

The product adopt high carbon steel, after high-frequency quenching and heat treatment, has high hardness, strength, good abrasion resistance, adopted continuous operation of high temperature and high pressure, improved the service life of the oil press, which can be used for decades time.

Reasonable pressing chamber High oil extraction rate

On the principle of multistage pushing and gradual compressing, make the pressing chamber pressure increases quickly, separate the oil one time, and uses infrared temperature control system, control the pressing temperature and water rate automatically, soften the oil plants directly and activate the oil molecules, press stably, finish press only one time, improve oil extraction rate grately.

Extensive press Multi purpose

Regardless of weather conditions across the country, truly realized the effect that get oil soon after starting press, the machine adopts forced blanking device, average feeding speed, press speed is fast, can press more than 40 oil plants such as peanuts, soybeans, rapeseeds, sesame seeds, sunflower seeds, flaxseeds, camellia seeds, cotton seeds, pepper seeds, walnut kernel, tung seeds, castor seeds, almond etc.

Inquiry >> +86 371 60101636 Mobile Phone: +86 13526484859
Your tel :
* Your mail :
* Inquiry :